Yokogawa CA450 Process Multimeter
2 sold in last 19 hours
|
|
₹18,999.00
From daily inspection to troubleshooting of measurement instruments— all in a single unit! ideal for checking the operation of field devices and maintenance of electrical equipment. Similar to the Fluke 787 & Fluke 789.
The Yokogawa CA450 Process Multimeter is a portable test instrument to combine a digital RMS multimeter and a loop calibrator to give process technicians the same functionality in one tool. The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor. Process technicians can now do the same job while carrying less equipment
Product Tags: #Process Multimeter #Yokogawa CA450 #Alternative to Fluke 789
Loop Power and 4 to 20 mA Output function in a DMM
- Loop check functions
- Simultaneous 24 V loop power and mA measurement
- HART/BRAIN mode setting with loop power (Adds 250 ohm resistance internally
- Generation functions
– SIMULATE (SINK) function simulates transmitters– 4-20 mA span/step/auto-step/sweep output - Measurement functions
- – High accuracy signal measurement:– DC mA 0.05%/30.000 mA– Handheld DMM function– Peak Hold function for the peak voltage measurement of DCS power supply– Dedicated sensor modes for direct reading of many sensor signal types
- Enhanced Safety—helps eliminate electric shocks
– Current terminal shutter prevents incorrect connections
– 1 A or more of AC/DC current can be read directly using the optional clamp probe and scaling in SENSOR mode.*1
– Measurement categories 600 V CAT. IV, 1000 V CAT. III - Linking with a PC
- DMM Communication Package can be used to save and
- Loop check function
- Span generation function
- Step generation function
- Sweep generation function
- AC/DC Current measurement (SENSOR mode
- Transmitter simulation function
- Similar to the Fluke 787 & Fluke 789
| DC voltage | 0.09% rdg+1 dgt6 00.0 mV to 1000 V |
| Current voltage (true rms value) | 0.5% rdg+5 dgt 600.0 mV to 1000 V (45 to 500 Hz) |
| DC current (mA) | 0.05% rdg+2 dgt/30.000 mA |
| 0.05% rdg+2 dgt/100.00 mA | |
| Impedance | 0.2% rdg + 1 dgt 600.0Ω to 60.00 MΩ |
| Frequency | 0.005% rdg + 1 dgt199.99 Hz to 19.999 kHz |
 |
|
| Diode test | 1% rdg + 2 dgt 2.000 V |
| Continuity | Beeps under 50 ±30Ω |
| Display update rate (times/sec.) | 2.5 to 5 |
| Data hold | |
| Peak hold (DCV) | |
| Standard deviation | |
| Max/min | |
| DC current (mA) | 0.05% to span of 20.000m A0.001mA to 25.000mA, Max. load 28 V |
| Simulate (Sink) | 0.05% to span of 20.000mA 0.001mA to 25.000mA, Ext. power 15 to 48 Vdc |
| Loop power function | 24V with 250Ω resistance ON/OFF function |
| Auto-step | |
| Auto-sweep | |
| Step (manual) | |
| Safety standard | EN61010/1000VCAT III, 600VCAT IV |
| Communication (optional) | IR-USB |
| Backlight |
Related Products
Loop Power and 4 to 20 mA Output function in a DMM
- Loop check functions
- Simultaneous 24 V loop power and mA measurement
- HART/BRAIN mode setting with loop power (Adds 250 ohm resistance internally
- Generation functions
– SIMULATE (SINK) function simulates transmitters– 4-20 mA span/step/auto-step/sweep output - Measurement functions
- – High accuracy signal measurement:– DC mA 0.05%/30.000 mA– Handheld DMM function– Peak Hold function for the peak voltage measurement of DCS power supply– Dedicated sensor modes for direct reading of many sensor signal types
- Enhanced Safety—helps eliminate electric shocks
– Current terminal shutter prevents incorrect connections
– 1 A or more of AC/DC current can be read directly using the optional clamp probe and scaling in SENSOR mode.*1
– Measurement categories 600 V CAT. IV, 1000 V CAT. III - Linking with a PC
- DMM Communication Package can be used to save and
- Loop check function
- Span generation function
- Step generation function
- Sweep generation function
- AC/DC Current measurement (SENSOR mode
- Transmitter simulation function
- Similar to the Fluke 787 & Fluke 789
Reviews
There are no reviews yet.